首页 | 关于泽泰 | 进出口业务 | 产品 | 人才招聘 | 友好链接 | 联系我们English       

你的位置:产品 > 工业织物和军用织物 > 防寒服用织物 (ECWCS
           防寒服用织物 (ECWCS
 
用于: 第二代 Extended Cold Weather Clothing System 大衣和长裤
用户: 美国海上军团
指标: MIL-PRF-44187D
NSN: Parka 8415-01-421-9245 through 9280
Trousers 8415-01-451-2773 through 3260

特点:

  • 适合于温度范围 -60oF to 70oF
  • Trousers have Cordura seat and knee patches for abrasion resistance, cargo pockets and belt & suspender loops
  • Parka has a stowable hood, two breast pockets, two shoulder pockets, large cargo pockets (with handwarmer pockets behind them), two-way full front zipper, Velcro closures on wrists, underarm ventilation, Cordura reinforced elbows, and rank tab at center chest
  • GORE-TEX® fabric meets and exceeds requirements of MIL-PRF-44187D
  • 织物结构:2.8 oz. nylon Taslite/GORE-TEX® film/1.5 oz. nylon tricot
  • Breathable - GORE-TEX® fabric allows moisture vapor to move away from skin
  • 防风,有效阻隔沙和微粒;
  • Non-wicking barrier applied to cuffs of parka/trousers & lower hem of parka
  • Unlined parka has reduced bulk and weight
  • Parka is 4 inches wider in chest, and 2 inches longer than 1st Generation ECWCS
  • Separate attachable hood for Zones V - VII (optional fur ruff can be attached to hood)
  • Oversized to be worn over insulated layers

MIL-PRF-44187D 指标要求:

CHARACTERISTIC REQUIREMENT
Weight 6.0 oz/yd2 max
Break strength 135 lb warp, 100 lb fill (min.)
Tear strength 3.0 kgf warp, 3.0 kgf fill (min.)
MVTR - B method 600 g/m2/24 hr (min)
MVTR - BW method 3600 g/m2/24 hr (min)
MVTR after synthetic perspiration - B method 600 g/m2/24 hr (min)
MVTR after synthetic perspiration - BW method 3600 g/m2/24 hr (min)
Sustained hydrostatic resistance - initial no leakage
Sustained hydrostatic resistance after abrasion no leakage
Sustained hydrostatic resistance after strength of coating no leakage
Sustained hydrostatic resistance after exposure to DET - initial no leakage
Sustained hydrostatic resistance after exposure to DET - after laundering no leakage
Sustained hydrostatic resistance after exposure to diesel fuel - initial no leakage
Sustained hydrostatic resistance after exposure to diesel fuel - after laundering no leakage
Sustained hydrostatic resistance after exposure to weapons lubricant - initial no leakage
Sustained hydrostatic resistance after exposure to weapons lubricant - after laundering no leakage
Sustained hydrostatic resistance after exposure to motor oil - initial no leakage
Sustained hydrostatic resistance after exposure to motor oil - after laundering no leakage
Sustained hydrostatic resistance after exposure to JP-8 - initial no leakage
Sustained hydrostatic resistance after exposure to JP-8 - after laundering no leakage
Sustained hydrostatic resistance after high humidity no leakage
Stiffness 10 cm warp, 10 cm fill (max)
Water permeability - Initial no leakage
Water permeability - after 70oF Gelbo flex no leakage
Water permeability - after -40oF Gelbo flex no leakage
Water permeability - after synthetic perspiration no leakage
Water permeability - after DET no leakage
Water permeability - after diesel fuel no leakage
Water permeability - after weapons lubricant no leakage
Water permeability - after motor oil no leakage
Water permeability - after JP-8 no leakage
Water permeability - after seam tape no leakage
Spray rating after 5 launderings 90, 90, 80 min.
Oil ratings after 5 launderings 4, 4, 4 min. for each color
Physical surface appearance change after 20 launderings no change
Dimensional stability 4.0% warp, 2.0% fill (max)

 

 
©2000-2002 北京泽泰科技有限责任公司 ZedTech Limited